mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-66 cage code 06324 557-109 emi/rfi banding backshell assembly for mil-c-24308 connectors 557 109 m 2 04 c product series basic number finish (table iii) retainer clips & jackscrews (omit for none) cable entry (table ii) shell size (table i) connector shown for reference only b c .500 (12.7) a .157 + .003 (4.0 + 0.1) 2 places .035 (0.9) g f 1.000 (25.4) "c" option notes: 1. metric dimensions (mm) are indicated in parentheses. 2. end fitting may be brazed on per mil-b-7883b, type v, grade b. 3. see 687-316 for jackscrew hardware see note 2 (see note 3)
mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-67 cage code 06324 557-109 emi/rfi banding backshell assembly for mil-c-24308 connectors metric dimensions (mm) are indicated in parentheses table i: connector interface dims shell size 1 2 3 4 5 a 1.203 (30.6) 1.531 (38.9) 2.078 (52.8) 2.718 (69.0) 2.625 (66.7) b .500 (12.7) .500 (12.7) .500 (12.7) .500 (12.7) .609 (15.5) c +.005 (0.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) table ii: cable entry dash no. 01 02 03 04 05 06 07 08 09 f dia .125 (3.2) .187 (4.7) .270 (6.9) .290 (7.4) .312 (7.9) .395 (10.0) .420 (10.7) .500 (12.7) .529 (13.4) g dia .205 (5.2) .267 (6.8) .350 (8.9) .370 (9.4) .392 (10.0) .475 (12.1) .500 (12.7) .580 (14.7) .609 (15.5 symbol b c* g* j lf m n nc nf t u** zn finish cadmium plate/olive drab black anodize anodic hard coat gold iridite over cadmium plate over electroless nickel cadmium plate/bright over electroless nickel electroless nickel cadmium plate/olive drab over electroless nickel zinc cobalt/dark olive drab cadmium plate/olive drab over electroless nickel cadmium plate/bright over electroless nickel cadmium plate/black zinc-nickel alloy/olive drab table iii: finish options *anodize finish is not suitable for emi shielding or grounding applications. **applicable to corrosion resisting steel backshells and accesso- ries. consult factory for other available finishes.
|
